Dr Shiva P. Dhakal and electrochemical uric acid sensing

Uric acid is a familiar compound with a complicated clinical story. It is associated with gout, kidney stones and metabolic conditions, yet its concentration becomes meaningful only when a laboratory method, calibration and clinical context are brought together. Electrochemical sensors offer a practical route: they convert a reaction at an electrode into an electrical signal calibrated to reveal how much uric acid is present in urine.

This Nepali researcher feature examines Dr Shiva P. Dhakal’s work on electrochemical sensors for uric acid and the value of connecting laboratory science with practical health needs. His profile is especially relevant to Australia, where researchers in Melbourne, Sydney and Brisbane are developing diagnostics that must meet exacting standards for accuracy, cost and usability.

Detection approach How uric acid is measured Typical setting Main limitation
Laboratory colorimetric assay Enzyme-driven colour change High-volume pathology Reagents, analysers and sample transport
Urine dipstick Enzyme-mediated colour pad Routine screening Limited range and selectivity
Electrochemical analyser Electrical current or potential from an electrode Clinical laboratories Instrument, consumable and calibration costs
Miniaturised research sensor Enzyme-mediated or enzyme-free electron transfer Portable and point-of-care testing Stability, matrix effects and validation

Chemistry, sensors and public health

Dr Dhakal’s work sits at the junction of physical chemistry, sensor design and public health. The central problem is translation: a reaction may work in a buffered laboratory solution but behave differently in real urine. Sensor development therefore joins chemistry with engineering, careful calibration and an understanding of how people will use a device.

Electrochemical detection can be compact and well suited to portable instruments. An electrode can be paired with an enzyme, a mediator or a selective membrane, then connected to a simple circuit. The design challenge is to preserve a stable signal across temperature changes, sample variation and repeated use.

For a researcher working from Nepal, this combination of chemistry and practical constraints is especially meaningful. Electrochemical sensing can support accessible teaching and locally appropriate diagnostic development, provided that claims about accuracy are backed by validation using representative samples.

How the sensor detects uric acid

A common design uses uricase, an enzyme that converts uric acid into allantoin and hydrogen peroxide. When the enzyme is immobilised near an electrode, oxidation of the hydrogen peroxide produces a current proportional to the original uric acid concentration. Applying a controlled voltage helps separate the target reaction from unwanted electrochemical activity.

Other designs use electron mediators to transfer charge more efficiently, while enzyme-free methods detect the direct oxidation of uric acid at a modified surface. Each approach involves trade-offs involving response speed, manufacturing complexity, fouling and the amount of sample required.

Urine complicates the analysis because it contains interferents that may also generate electrical signals. Ascorbic acid, dopamine and other reducing compounds can affect some electrodes, while variations in pH, ionic strength and creatinine can alter the apparent response. Selective membranes, surface coatings and appropriate calibration are therefore as important as the enzyme chemistry.

Performance must be assessed through more than a single laboratory result. Important measures include detection limit, linear range, reproducibility, response time, storage stability and resistance to matrix effects. Electrodes intended for repeated use also need to be tested for drift, regeneration and contamination.

Australian settings for better testing

Australia has more than one million people living with diabetes, while gout and kidney stones create further demand for reliable metabolic measurements. Uric acid cannot diagnose these conditions by itself, but urine measurements can complement broader assessments in primary care, particularly where symptoms or treatment responses need monitoring.

In Sydney and Melbourne, large pathology providers and collection centres process substantial urine volumes every day. Their purchasing decisions favour devices supported by dependable supply chains, clear calibration procedures and evidence that can survive quality-assurance programs. Point-of-care testing in emergency departments, general practices and aged-care settings offers a different market from consumer home testing.

The regulatory and reimbursement environment also shapes adoption. Medicare generally rebates pathology requested by a doctor, while a consumer urine strip is not automatically covered. The Therapeutic Goods Administration regulates relevant medical devices, and pathology providers must meet accreditation requirements, commonly through the National Association of Testing Authorities. Imported components and reference materials must satisfy customs requirements, while biological specimens may require permits.

Melbourne’s biomedical and engineering clusters, Sydney’s pathology networks and Brisbane’s universities provide complementary routes for evaluating new sensors. Australian conditions also create a demanding test environment: variable climates, long supply chains and users without specialist laboratory training make rigorous validation and simple operation essential.

Education across the Nepali chemistry community

NepaChem’s community focus gives Dr Dhakal’s work a natural place within accessible scientific discussion. Electrochemistry often appears in curricula as equations and diagrams, yet its value becomes clearer when students connect an electrode response to a real sample, a public-health question and a device someone might actually use.

NepaChem’s teaching-lab aspirin synthesis guide provides a useful parallel. Students learn not simply to complete a reaction, but to record yields, manage waste and explain uncertainty. Those same habits—measurement, repeatability and safety—are essential when an electrochemical sensor moves from a laboratory cell to a urine sample.

The same teaching model can cross continents. A university laboratory in Kathmandu, Pokhara, Melbourne or Brisbane can use electrode comparisons to explore enzyme activity, interference and reproducibility. Shared protocols and openly discussed results can then connect Nepali students with Australian peers, helping future chemists move between research laboratories, pathology services and public-health settings.

The legacy to remember

Dr Dhakal’s work shows how an electrochemical signal can become a meaningful diagnostic measurement. The chemistry must be selective, the method must survive realistic samples, and the result must be presented in a way that supports sound clinical decisions rather than suggesting that one number explains a person’s health.

The contribution to remember is not simply that uric acid can be detected. It is that careful chemical design can turn a demanding laboratory method into a compact, accessible measurement. Dr Shiva P. Dhakal’s work captures the lasting lesson: connect rigorous science with a human need, and analytical chemistry can travel further.